ใหม่! เครื่องตัดสติ๊กเกอร์ Silhouette Cameo 4 ที่พัฒนาขึ้น เยี่ยมกว่าเดิม
โดยมีแรงกดและความเร็วในการตัดมากขึ้น
พิเศษกับใบมีดชุดใหม่ ช่วยเพิ่มการตัดกับวัสดุที่มากขึ้น
แล้วยัง Built-in Roll Feeder & Crosscutter มาให้ได้ใช้กัน
ดูรายละเอียดเพิ่มเติมได้ที่ Cameo 4  ^^

ตัด pattern เสื้อผ้า

ตัด กล่องกระดาษ

Main Features

• Direct output from
•  the software
• Output by layer / color
• Possible to check the cutting lines by preview window
• Multiple over cutting is possible
• ARMS can be controlled by software
• Centering, Rotate, Mirror for easy layout
• Matrix copy for higher productivity
• Auto-welding for binding same color of shapes
• Tiling / Paneling for segmentation of cutting

OS version

• Windows, 2000, XP, Vista
• Mac OS X, 10.2 or later

Software version

• Illustrator for Windows 8, 9, 10, CS, CS2, CS3
• Illustrator for Mac 10, CS, CS2, CS3
• Corel DRAW 10, 11, 12, X3

• Output in separate layers or separate colors can be specified.
• Output conditions can be selected by layer name or color.
• Supports a sorting function to minimize media movement
• The Weed Border cutting function enables automatic output of a border to facilitate weeding of the cut media.
• Any drawing exceeding the plotter’s Valid Area can be output in multiple pages using the Tiling function.
• Output conditions can be managed by media name.
• Matrix Copy function
• The Cutting Simulation function enables checking of the cut sequence, changing of the cut sequence, and tiled cutting prior to actual output.

Item

FC2250-120

Flatbed

Effective cutting area

1200 x 920 mm

Media hold-down method

MG models: Magnetic

Maximum cutting speed

400 mm/s

Cutting force

Tool holder 1 cutting force: Max. 4.9 N (500 gf),
40-step range (1 - 40: in increments of 1)
Tool holder 2 cutting force: Max. 9.8N (1 kgf),
40-step range (2 - 80: in increments of 2)

Minimum character size

Approx. 10 mm square (varies with the character font and media)

Mechanical resolution

0.0025 mm (2.5 μm)

Programmable resolution

GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ mode: 0.025 mm

Distance accuracy

Within ±0.1% of the distance moved (plotter mode)

Perpendicularity

Within 0.5/900 mm (plotter mode)

Repeatability

Within 0.1 mm (plotter mode/cutting mode)

Number of tools

Pen types

Cutter pens, Water based fiber-tip pen, Oil-based ballpoint pens, Disposable ink pens*1

Cutting media

Marking film (vinyl, fluorescent, reflective), stiff paper/card up to 0.5 mm thick, sandblast rubber sheets up to 1.0 mm thick, high-intensity reflective film, polystyrene foam sheets, E/F/G flute cardboard*2

Interfaces

RS-232C, USB 2.0 (full speed); auto-switching

Buffer size

2 MB

Command sets

GP-GL, HP-GL™ emulation (menu-selectable)

LCD panel

20 characters x 2 lines

Registration mark reading function

Provided

Power supply

100 to 120 VAC, 50/60 Hz, 1.2 A max
220 to 240 VAC, 50/60 Hz, 0.7 A max

Operating environment

10 to 35°C, 35 to 75% RH (non-condensing)
 

Guaranteed precision operating environment

16 to 32°C, 35 to 70% RH (non-condensing)

External dimensions
(H x W x D)

Horizontal 944 x 1568 x 1285 mm
Tilted at 60° 1687 x 1568 x 987 mm

Weight (including stand)

Approx. 69 kg

Option

Vacuum pump (blower) [VC models only]

Multiple registration mark correction

Layout instructions are sent together with the cutting data for designs printed using layout functions such as set in a RIP, enabling continuous detection of registration marks for cutting. This feature is excellent when high accuracy is needed when cutting an array of copies.

Automatic registration mark detection

The first registration mark is detected automatically, eliminating the need to position the head to the registration mark manually. Subsequent registration marks are automatically redetected even if marks are not immediately found, saving the time of starting over.

Full software support

Registration mark commands are provided to control ARMS functions from your software applications such as the Cutting Master 2.

Creasing functions

2-Tool Mounting for Easy Switching

Two tools can be mounted at the same time for easy switching. If you mount the cutter plunger and the creasing tool at the same time, you can perform both cutting and scoring operations without having to exchange tools.

If you mount a plotter pen, you can draw check plots before commencing the actual cutting.

Simple creasing function

A simple creasing function to create fold lines for clean folding on microflute and cardboard has been enabled.

• Up to three fold lines can be selected.
• Spacing between the lines can also be specified.
• Repeated creasing can also be specified for each line.