ติดต่อรับข้อมูลข่าวสารได้ตามช่องทางนี้
|
ใหม่! เครื่องตัดสติ๊กเกอร์ Silhouette Cameo 4 ที่พัฒนาขึ้น เยี่ยมกว่าเดิม
โดยมีแรงกดและความเร็วในการตัดมากขึ้น
พิเศษกับใบมีดชุดใหม่ ช่วยเพิ่มการตัดกับวัสดุที่มากขึ้น
แล้วยัง Built-in Roll Feeder & Crosscutter มาให้ได้ใช้กัน
ดูรายละเอียดเพิ่มเติมได้ที่ Cameo 4 ^^
|
|
|
ดูรายละเอียดภาษาไทย....คลิ๊ก
The CIS (Contact Image Sensor) method enables high-resolution scan, high-speed scan, energy saving, and light and compact design.
Graphtec scanners allow for “High Definition Plus” via the CIS method.
HD Plus1 |
High-speed and high-resolution maximizing CIS performance |
HD Plus2 |
High-resolution scan with 600dpi optical resolution |
HD Plus3 |
High-density scan with 9600 dpi interpolated resolution |
HD Plus4 |
High-speed scan, Monochrome 8 seconds, Color 29 seconds *1 |
HD Plus5 |
High speed stand-by, warm-up time 10 seconds *2 |
HD Plus6 |
Outstanding environmental performance
Compatible with new standard of the Energy star program
Compatible with RoHS |
HD Plus7 |
Compact & Lightweight
|
*1 When using A0 size, 62sec / A0 for CSX300
*2 18s for CS510/610/IS210
CIS : Contact Image Sensor Method
CCD : Magnification Optical Method
All Graphtec scanners currently use the CIS sensor system, ensuring sharp, crisp and clear image reproduction. This technical advantage is further reinforced by a very accurate paper feed and hold technology. Even deep wrinkles on paper can be smoothed to provide optimal image reproduction. Graphtec scanners provide stunning high-resolution images compared to other products in the market. Graphtec scanners (CS610/510/CSX300) achieve a wider color gamut using the CIS method instead of the older CCD method. (CS610/510/CSX300) can produce high levels of precision and accuracy, as well as a high Optical Resolution of 600dpi. These are truly state-of-the-art scanners that not only meet the needs of industries requiring precise images such as civil engineering drawings, city planning drawings and apparel paper patterns, but also satisfy the needs of the graphic arts and printing industries.
Corona Effect
What is the CIS (Contact Image Sensor) method used in the image scanner?
Image scanners can use one of two methods to scan documents—CIS or CCD.
Graphtec employs the leading-edge CIS method for optical systems in its scanners.
Enabling extremely high-resolution and high-accuracy input with large-format scanners, the CIS (Contact Image Sensor) method is a state-of-the-art scanning technology that uses contact image sensors developed solely by Graphtec.
|
|
CCD method
(optical reduction method)
Light from the light source is reflected by the document’s surface. This reflected light is reflected further by a mirror, directed through a lens, and received by the CCD.
Since the CCD reads light reduced by the lens, this method is called the “optical reduction method”.
|
CIS method
(contact image sensor method)
The light from the three RGB color LEDs used as light source are reflected by the document. This reflected light is received in turn by the CIS sensor, which performs the actual scanning. The LEDs, lens, and sensor are integrated into a single module. Since these components are all rods of the same length in close contact, this method is called the “contact image sensor” method. This is the method used by Graphtec.
This method is ideal for markets that require precision for applications such as civil engineering survey drawings, urban planning drawings, and apparel patterns.
|
|
Features of CIS method |
Sharp image scanning |
All models provide 600dpi optical resolution and 9600 dpi interpolated resolution allowing high-resolution and high-quality scanning.
Further high-resolution and high-quality scanning is enhanced by Graphtec technology that improve contact between document and sensor.
|
No Warm-up time |
The scanner is ready for scanning 10 seconds after power on *1, thus saving energy. |
Power save |
This feature meets several environmental standards.
P ower consumption is 5w or less when it is in power save mode.*2 |
Compact Design |
Compact design saves space, operability and resource. |
*1 18s for CS510/610/IS210
*2 6.3W or less for CS610
-
Method
|
CCD method
|
CIS method
|
GRAPHTEC CIS method
|
Image quality |
Good |
Good |
Excellent |
Warm-up time |
Poor |
Excellent |
Excellent |
Power consumption |
Poor |
Good |
Excellent |
Compact dimensions |
Poor |
Excellent |
Excellent |
-
High-speed scan
High-speed is provided with our long-established document feeding technology.
CS/IS Series scanning system
|
Scans thick medium up to 20.3 mm (0.8 inch)
CS610 Series supports the ITA (Intelligent Thickness Adjustment) feature, allowing for scanning of thick medium up to 20.3 mm (0.8 inch). To load a medium using the ITA feature while automatically detecting its thickness, first press the ITA button to activate the function. Then gently push the top edge of the medium against the top cover, which allows the cover to rise up. After loading the medium, the cover closes to place it in position.
|
|
Supports a mechanism that can "Iron out" the wrinkles on paper and ensure reliable paper feeding
CS 610/510 and IS210 adopt a new paper pressure feeding mechanism, which helps smooth out even the badly wrinkled paper and ensure optimal image reproduction. Thick medium can be securely held to guarantee correct feeding, resulting in accurate scanning.
|
|
Equipped with sliding paper guides with a right-left balancing function
All series now have as standard the sliding paper guides with a right-left balancing function, a very useful mechanism when loading medium, and has proved very popular among many users.
|
Specifications CS 610 PRO
Item
|
CS 610 PRO
|
Document sizes |
ANSI E to ISO A4 |
Maximum scanning medium width |
1,092 mm/43 inches ( centered ) |
Effective scanning area |
Width : 1,066.8 mm/42 inches ( centered )
Length : 999.999 m ( maximum ) *1 |
Document thickness |
20.3 mm/0.8 inches or less 1.5 mm (0.06 inches) or less (including the carrier sheet) |
Document thickness detection |
Automatic detection by ITA |
Optical resolution |
600 dpi |
Interpolated resolution
(in 1 dpi increments) |
50 to 9600 dpi |
Main scanning system |
Contact image sensor system (five A4 sensors in a zigzag pattern) |
Sub scanning system |
Document travel (sheet through) system |
Scanning speed *2 |
When the document thickness is 1.5 mm/0.06 inches or less ( 400 dpi, ISO A0 ) |
High-speed scan |
Monochrome : 8s
Gray : 16s
8bit Color : 32s
24bit color : 29s |
Normal scan |
Monochrome : 13s
Gray : 19s
8bit Color : 45s
24bit color : 41s |
When the document thickness is 1.5 mm/0.06 inches to 20.32 mm/0.8 inches ( 400 dpi, ISO A0 ) |
High-speed scan |
Monochrome : 29s
Gray : 29s
8bit Color : 37s
24bit color : 36s |
Normal scan |
Monochrome : 35s
Gray : 35s
8bit Color : 45s
24bit color : 41s |
Scanning precision *3 |
+/-0.1% |
Gradation |
Monochrome : Bilevel, intermediate tones (dithering, error diffusion) Gray: 256 shades
Color : 8-bit, 24-bit |
Threshold value |
Automatic threshold settings by DSP during monochrome mode |
Color space |
s-RGB compatible |
Light source |
LED (RGB) |
Interface |
USB 2.0(High Speed), 10BASE-T/100BASE-TX |
Output |
Image data |
Rated power supply |
100 to 120/200 to 240 VAC +/-10%, 50/60 Hz |
Operating environment |
Temperature: 10 °C to 35 °C; Humidity : 35% to 80% R.H. (non-condensing) |
Power consumption *4 |
60W or less
(6.3W or less in power save mode) |
External dimensions (approx.)
(W×H×D) |
1,205 × 957 × 690 mm/47.4 × 37.7 × 27.1 inches ) (including stand) |
Weight (approx.) |
47 kg (including stand) |
Conforming standard |
UL, FCC class A (USA), CE mark (EU), ccc, EK mark |
Operating system (OS) |
Windows Vista, Windows XP Professional, Windows XP Home Edition, Windows 2000 Professional |
*1 The maximum length of 999m can be set at the ScanningMaster21+. But actual scanning length varies depending on the specification of PC and the condition of scanned document.The scanning of the long length is out of the guarantee.
*2 Including data transfer time Scanning system requirements (Scanning speed may decrease depending on PC specifications)
CPU : Pentium4 3.2GHz or higher ; Memory : 1 GB or more ; Interface : USB2.0
*3 Notes on scanning precision
Scanning precision may vary slightly depending on the grad eand thickness of the medium being scanned, and on the operating conditions. The precision figures above were measured under the operating conditions
described below.
Test chart used: Mylar sheet #200
Guaranteed precision conditions: Temperature 20 +/- 3 °C ; Humidity 60% +/- 10% R.H.
Guaranteed scanning precision range: Width : 1,066.8mm ; Length : 1,508.7mm ; Thickness : 1.5mm or less
Scanning precision at 1 meter length
*4 Power save mode is set when the document is not loaded and not operated more than 13 minutes
Power save mode is canceled when document is loaded
Versatile “Scanning Master 21+” driver software enables a range of scanner and data operations
The Scanning Master 21+ software for scanners provides a wide range of features, including a powerful backup solution for those using scanners. This software converts scanned data into digital data and offers simple data editing and correction functions. Specify scan settings for specific needs.
Simple copy function
Offers an integral Scan-to-Print function. After scanning the document, you can have scanned data printed automatically via the Windows driver.
|
|
Automatic deskewing
Skewed documents fed into the scanner are automatically deskewed for skews of up to ±7.1°. Available for grayscale, 256-bit color, and full-color data as well as bilevel data.
|
|
Automatic despeckling function
Automatically removes speckles as the document is scanned.
Any speckles below the specified pixel level are removed for monochrome data. For grayscale and color data, the software applies an averaging function to match surrounding colors.
Entire drawing/Detailed drawing function
Entire drawing
Displays the entire image in a separate window. This function lets you confirm which part of the image to display.
|
Detailed drawing
Displays a detailed drawing of the image displayed at the current cursor position in a separate window.
|
Lets you make scan settings/documentspecific scan settings
You can set scanning conditions suitable for different document types (e.g., maps, drawings, or blueprints) in advance to enable easy selection of the most appropriate scanning environment.
Moreover, these conditions can be edited and new scanning conditions added and stored.
Suppressing the background color
To enable scanning, you can adjust White point, Crease reduction threshold level, and Crease reduction intensity values to turn the background of the tracing paper or mylar film white.
Continuous scanning function
Press the scanner Scan key on the main body to enable continuous scanning. File names are automatically numbered and saved sequentially.
Saving scanned data as PDF files
Select the appropriate command from the File menu to save scanned data in PDF file format. This feature enables various data management and application methods.
บริษัทขอสงวนสิทธิ์ในการปรับปรุงรายละเอียดปลีกย่อยของสินค้า เช่นสี วัสดุที่ใช้ หรือราคาโดยไม่ต้องแจ้งให้ทราบล่วงหน้า โดยการปรับเปลี่ยนจะยึดเอาความต้องการของลูกค้าส่วนใหญ่ และ วัตถุดิบที่มีคุณภาพ มาใช้ทดแทนกัน เป็นที่ตั้ง สินค้าทั้งหมดได้รับการคุ้มครอง ภายใต้กฎหมายว่าด้วยลิขสิทธิ์ ห้ามมิให้บุคคล หรือ นิติบุคคลใดๆ ลอกเลียนแบบการออกแบบ ไม่ว่า ส่วนหนึ่งส่วนใด หรือทั้งหมด หากละเมิด ทางบริษัทจะดำเนินการที่กฎหมายบัญญัติเอาไว้สูงสุด
บริษัท ไอเดีย เมคเกอร์ เทคโนโลยี จำกัด
1796-1800 หมู่ 9 ถ.สุขุมวิท ซ.ตรงข้ามบิ๊กซีจัมโบ้(ปู่เจ้าสมิงพราย)
ต.เทพารักษ์ อ.เมือง จ.สมุทรปราการ (ลงถนนกาญจนาภิเษก สู่ถนนสุขุมวิทเพียง 1 ก.ม)
Tel. 02-7550290-1 , 02-7578488-9 Hotline : 081-6298220 Fax. 02-7576980
ในเวลาทำการ จันทร์-เสาร์ 9.00-18.00 น.
-----------------------------------------------------------------------------------------------------
กรอกข้อมูลสอบถามด้านล่าง